logo
Aperçu Produitséquipement d'essai non destructif

HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface

Les Meilleurs Produits
Certificat
LA CHINE HUATEC  GROUP  CORPORATION certifications
LA CHINE HUATEC  GROUP  CORPORATION certifications
Examens de client
produits de la gamme large de NDT, nous pouvons obtenir tous dans le groupe huatec. Nous préférons acheter auprès d'eux. Rudolf Shteinman Russie

—— Rudolf Shteinman

J'aime le service, réponse très rapide, travail professionnel. Aret Turquie

—— ARET Kaya

huatec testeur de dureté, de très bonne qualité, nous sommes très satisfaits avec le testeur de dureté portable la BSG-50. Kumaren Govender Sotuth Afrique

—— Kumaren Govender

Je suis en ligne une discussion en ligne

HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface

HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface
HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface

Image Grand :  HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface

Détails sur le produit:
Lieu d'origine: Chine
Nom de marque: HUATEC
Certification: CE
Numéro de modèle: HGM-B268M
Conditions de paiement et expédition:
Quantité de commande min: 1 ensemble
Prix: USD505-USD570/SET
Détails d'emballage: Emballage en plastique dur noir de carton de box+Outer
Délai de livraison: 3-5 jours ouvrables après réception de votre paiement
Conditions de paiement: T/T, Western Union, Paypal
Capacité d'approvisionnement: 10 séries/mois

HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface

description de
Plage d'affichage: 0~2000 (GU) erreur d'affichage: 0-199<2 GU, 200-2000<1% Gs
Stabilité: <2 Gu=""> Angle: 20°, 60°, 85°
tache de mesure: ellipse 16×48 (millimètre) Dimension: 138×36×82 (millimètre)
Alimentation: 4.8V (intérieur de batterie rechargeable)
Mettre en évidence:

portable gloss meter for metal

,

multi-angle gloss meter 20° 60° 85°

,

gloss meter for coating surface

HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface

  1. Reference standard and applicable scope

HGM-B268M. The gloss meter executive the ISO-2813,ISO-7668,GB8807 standard which is the high accuracy, the miniaturized gloss meter. Test with three angles of 20,60 and 85 degree of angle.

HUATEC Gloss meter Reference angle for different application

Angle Point of reference for (foreign) (China)

Application





20°

DIN-67530

ISO-2813 GB9754

ASTM-D523

ASTM-D2457 GB8807

high gloss paint, ink, plastic.


20°

ASTM-D1834

TAPPI-T653 GB8941.1

high gloss stencil, cast coated paper.


45°

ISO-2767 GB8941-2 surface of aluminum and aluminum oxide.
45°

ASTM-C346 GB/T3295

ASTM-D2457 GB8807

pottery, ceramic, plastic, plastic film, Stone
45° JIS-E8741 pottery, ceramic, plastic, plastic film, Stone



60°

ISO-2813 GB9754

ASTM-C584 GB9966

ASTM-D523

DIN-67530

ASTM-D2457 GB8807

Mid-gloss paint, ink, plastics, ceramics, stone.



75°

ISO-8254

TAPPI-T480 GB8941.3

copperplate paper
85°

ISO-2813 GB9754

DIN-67530

ASTM-D523

high gloss paint, ink, plastic.
  1. Application

●All kinds of coating and finishing surfaces, such as paints, varnishes, printing ink, etc.
●Decorative materials, such as metal, marble, granite, polishing brick, ceramic tile and so on.
●The other kinds of materials and objects, such as plastic, woodenware, paper, etc.

3.Technical parameter

The technical parameters up to JJG 696 (First-level standard).

(1)display range of:0~2000(Gu)

(2)display error:0-199<2 Gu,200-2000<1% Gs

(3)angle: 20°, 60°,85°

(4)stability:<2 Gu/30min

(5)measurement spot:16×48(mm)ellipse

(6)dimension:138×36×82 (mm)

(7)power supply:4.8V (Rechargeable battery inside)


Features
1. Small and light, real easy to be carried and used.
2. 4.8V Rechargeable battery can be used for almost 60 hours and 10000 reading.
3. High stability
4. Long-term stable light source needs no replacing forever.
5. Quartz crystal standard board, no excursion.

Instructions

Press the switch equipment in the measurement mode, the instrument on the sample, the value of the samples showed that the value of the gloss (Gs). When the measurement is greater than 2000Gu, showed that "OVER" the words.

When electric quantity insufficiency demonstrated that “bAtt” the inscription, this time should with the special-purpose charging source charge, the charging source plug insert promptly to the instrument side charge plug on, duration of charging about four hours. Charge standard “⊕”, when charge on the kneading board led is lightened.

When the power is low show "bAtt" words, at this time should be used in time-specific charge rechargeable power supply, rechargeable power supply plug into sockets on the equipment side of the charge, charge time in about four hours. Charging standard "⊕", led the charge when the panels were lit.


Calibration
When the standard equipment on board and show that numerical standards board is greater than the difference between the nominal value of 1.2 gloss units, the following methods should be calibrated
Measuring instruments on the window and down the board, press the "home / home zero" key, show value for the 0.0 at this time.
A black glass plate instead of the standard black-velvet panels, measuring instruments on the window, rather than pressing the "calibration / measurement of" key, set to enter the state, showed that at this time, "000.0" and the first "0" flashes. Rather than pressing the "shift" key-flashing shifted to right, rather than pressing the "home / home zero" key "flicker" values change from 0-9-0, through pressed "shift" and "home / home zero" Made with numerical keys and display glass panels with a nominal value of the same standard, at this time rather than pressing the "calibration / measurement," the completion of key settings. Then white ceramic standard equipment on board, show value and the standard white ceramic plate with a nominal value of the error should not be greater than ± 1.2 gloss units, or else should be considered standard dirty plates. After the completion of the above-mentioned steps can be measured samples.

NOTE
Contents of this instrument 4 rechargeable batteries,
Package of instruments include:
Host a standard set of plates: black and white piece of the board, board zero a (standard on black velvet box), a manual, a certificate, a charger, an instrument box.


Standard Delivery

Gloss meter 1pc
Instrument case 1pc
Standard board

2pc

A black board is used for the highlight calibration

A white board is used for the low light calibration

Battery charger 1pc
English instruction manual 1pc
Calibration certificate 1pc

HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface 0HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface 1HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface 2HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface 3HGM-B268M Portable Multi-Angle Gloss Meter 20° 60° 85° for Metal & Coating Surface 4


Coordonnées
HUATEC GROUP CORPORATION

Personne à contacter: Ms. Shifen Yuan

Téléphone: 8610 82921131,8618610328618

Télécopieur: 86-10-82916893

Envoyez votre demande directement à nous (0 / 3000)

Autres Produits